Die Cisco Catalyst Serie 3850 bietet eine umfassende Plattform, die für vollständige Konvergenz zwischen kabelgebundenen und drahtlosen Netzwerken sorgt. Herzstück der Switches bildet die Unified Access Data Plane (UADP) ASIC (Application-specific Integrated Circuit) von Cisco. Diese anwendungsspezifische integrierte Schaltung ermöglicht eine einheitliche Durchsetzung von Richtlinien für kabelgebundene und drahtlose Netzwerke, mehr Transparenz für Anwendungen und eine Optimierung der Anwendungsleistung. Die Cisco Catalyst Switches der Serie 3850 bieten vollständige Unterstützung für Power over Ethernet Plus (PoE+) nach IEEE 802.3at, modulare und vor Ort austauschbare Netzwerkmodule sowie redundante Lüfter und Netzteile.
Produktbeschreibung | Cisco Catalyst 3850-12XS-S - Switch - 12 Anschlüsse - managed - an Rack montierbar |
Gerätetyp | Switch - 12 Anschlüsse - L3 - managed - stapelbar |
Gehäusetyp | An Rack montierbar 1U |
Untertyp | 10 Gigabit Ethernet |
Ports | 12 x 1 Gigabit / 10 Gigabit SFP+ |
Leistung | Switching-Kapazität: 320 Gbit/s Mehrfachbandbreite: 480 GBit/s |
Kapazität | IPv4-Routen: 24000 NetFlow-Einträge: 24000 Virtuelle Schnittstellen (VLANs): 4000 Switched virtual interfaces (SVIs): 1000 |
Größe der MAC-Adresstabelle | 32.000 Einträge |
Jumbo-Rahmenunterstützung | 9198 Byte |
Routing Protocol | IS-IS, RIP-1, RIP-2, IGMPv2, IGMP, IGMPv3, Policy-Based Routing (PBR), RIPng, MLDv2, MLD |
Remoteverwaltungsprotokoll | SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI |
Leistungsmerkmale | DHCP Support, ARP-Unterstützung, Syslog-Unterstützung, PIM-Snooping, Multiple Spanning Tree Protocol (MSTP)-Unterstützung, DHCP-Snooping, Unterstützung für Dynamic Trunking Protocol (DTP), Unterstützung für Port Aggregation Protocol (PAgP), Unterstützung für Trivial File Transfer Protocol (TFTP), Unterstützung für Access Control List (ACL), Quality of Service (QoS), SSH-Unterstützung, Virtual Route Forwarding-Lite (VRF-Lite), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), Energy Efficient Ethernet, Virtual Routing and Forwarding (VRF), Cisco StackWise-480-Technologie, Cisco StackPower-Technologie, Flexible NetFlow (FNF), 802.1x-Authentifizierung, RRM (Radio Resource Management), ARP-Inspektion, Weighted Tail Drop (WTD), VLAN Trunking Protocol (VTP), Bridge protocol data unit (BPDU), Control plane protection (CoPP) |
Produktzertifizierungen | IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
Stromversorgung | Wechselstrom 120/230 V (50 - 60 Hz) |
Redundante Stromversorgung | Optional |
Abmessungen (Breite x Tiefe x Höhe) | 44.5 cm x 45 cm x 4.45 cm |
Gewicht | 5.8 kg |
Allgemein | |
Gerätetyp | Switch - 12 Anschlüsse - L3 - managed - stapelbar |
Gehäusetyp | Desktop, an Rack montierbar 1U |
Untertyp | 10 Gigabit Ethernet |
Ports | 12 x 1 Gigabit / 10 Gigabit SFP+ |
Leistung | Switching-Kapazität: 320 Gbit/s Mehrfachbandbreite: 480 GBit/s |
Kapazität | IPv4-Routen: 24000 NetFlow-Einträge: 24000 Virtuelle Schnittstellen (VLANs): 4000 Switched virtual interfaces (SVIs): 1000 |
Größe der MAC-Adresstabelle | 32.000 Einträge |
Jumbo-Rahmenunterstützung | 9198 Byte |
Routing Protocol | IS-IS, RIP-1, RIP-2, IGMPv2, IGMP, IGMPv3, Policy-Based Routing (PBR), RIPng, MLDv2, MLD |
Remoteverwaltungsprotokoll | SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI |
Authentifizierungsmethode | Kerberos, Secure Shell (SSH), RADIUS, TACACS+ |
Leistungsmerkmale | DHCP Support, ARP-Unterstützung, Syslog-Unterstützung, PIM-Snooping, Multiple Spanning Tree Protocol (MSTP)-Unterstützung, DHCP-Snooping, Unterstützung für Dynamic Trunking Protocol (DTP), Unterstützung für Port Aggregation Protocol (PAgP), Unterstützung für Trivial File Transfer Protocol (TFTP), Unterstützung für Access Control List (ACL), Quality of Service (QoS), SSH-Unterstützung, Virtual Route Forwarding-Lite (VRF-Lite), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), Energy Efficient Ethernet, Virtual Routing and Forwarding (VRF), Cisco StackWise-480-Technologie, Cisco StackPower-Technologie, Flexible NetFlow (FNF), 802.1x-Authentifizierung, RRM (Radio Resource Management), ARP-Inspektion, Weighted Tail Drop (WTD), VLAN Trunking Protocol (VTP), Bridge protocol data unit (BPDU), Control plane protection (CoPP) |
Produktzertifizierungen | IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
RAM | 4 GB |
Flash-Speicher | 4 GB |
Statusanzeiger | Anschluß-Übertragungsgeschwindigkeit, Anschluß-Duplexmodus, Stromversorgung, System, aktiv, Status |
Erweiterung/Konnektivität | |
Schnittstellen | 12 x 10GBase-X SFP+ 1 x USB Type A 1 x Verwaltung (mini-USB) Type B 1 x Konsole RJ-45 Management 1 x Verwaltung (Gigabit-LAN) RJ-45 2 x Netzwerk-Stapelvorrichtung |
Erweiterungssteckplätze | 1 (gesamt)/ 1 (frei) x Erweiterungssteckplatz |
Stromversorgung | |
Stromversorgungsgerät | Internes Netzteil |
Installierte Anzahl | 1 |
Max. unterstützte Anzahl | 2 |
Redundante Stromversorgung | Optional |
Plan für redundante Stromversorgung | 1+1 (mit optionaler Stromversorgung) |
Gestellte Leistung | 350 Watt |
Erforderliche Netzspannung | Wechselstrom 120/230 V (50 - 60 Hz) |
Verschiedenes | |
MTBF | 371,440 Stunden |
Produktzertifizierungen | CISPR 22 Klasse A, CISPR 24, EN 61000-3-2, NOM, EN 61000-3-3, EN55024, EN50082-1, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, CCC, ICES-003 Klasse A, EN 61000-4-5, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, UL 60950-1 Second Edition, KCC, RoHS, FCC Part 15 A, AS/NZS 3548 Klasse A, BSMI Class A, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN24, KN22 Class A, AS/NZS CISPR 22, CNS 13438, EN 55022 Class A, EN 300 386, CAN/CSA-C22.2 No. 60950-1 |
Software / Systemanforderungen | |
Software inbegriffen | Cisco IOS IP Base |
Maße und Gewicht | |
Breite | 44.5 cm |
Tiefe | 45 cm |
Höhe | 4.45 cm |
Gewicht | 5.8 kg |
Umgebungsbedingungen | |
Min Betriebstemperatur | -5 °C |
Max. Betriebstemperatur | 45 °C |
Zulässige Luftfeuchtigkeit im Betrieb | 10 - 95% (nicht kondensierend) |
Min. Lagertemperatur | -40 °C |
Max. Lagertemperatur | 70 °C |